US Cooler Walk-in Cooler Without Floor
and 1 HP remote indoor refrigeration system

8' X 10' X 7' 6" Nominal

(7' 10" X 9' 9 1/2" & 7' 6" Actual)

US Cooler manufactures Premium Quality Walk-ins at Extremely Reasonable prices.

Unit is NSF and UL listed and tested.

This walk-in comes with a 1 HP remote indoor refrigeration system. System comes with a condensing unit, evaporator unit and miscellaneous parts, all that will need to be installed in the field. This refrigeration system must be installed by a licensed refrigeration technician.

Refrigeration unit includes a 1-year parts and labor warranty. Walk-in panels include a 10-year repair or replace parts only warranty. All other parts carry a standard 1-year parts warranty.

Refrigeration system is designed to hold product at 35 degrees Fahrenheit with product entering at 55 degrees Fahrenheit.

This indoor walk-in requires a minimmum of 6,752 BTUs. Details.

Estimated Shipping Weight: 1417 lbs.

Complete system comes delivered on pallets banded and wrapped for further protection. A forklift will be needed to unload unit or the unit can be unpacked and unloaded panel by panel off the pallet while it is still on the truck. Two or three people will need to be available to receive delivery if this choice is chosen. You may be charged a surcharge if it takes too long to unload the truck. The trucking company will be informed to call 24 hours before delivery.

PANELS 

• Wall and ceiling panels are constructed with tongue and groove 1 1/4 LB expanded polystyrene insulation sandwiched between two sheets of 26-gauge stucco embossed galvanized steel. Each panel comes equipped with cam action locking devices and double barrel vinyl gasket to allow easy assembly of walk-in in the field.
• FLOOR - Walk-in coolers and freezers without a floor must be installed on a ground contact concrete floor. A cooler can be installed without insulating the floor and a thermal break under each wall panel but we recommend installing both. A freezer must be installed on an insulated concrete floor and must include a thermal break under each wall panel.
• DOOR - 34" x 76" flush-mount cooler door is manufactured with foamed in place polyurethane insulation encapsulated between sheets of embossed 26 gauge G90 stucco embossed galvanized steel. Door is right hand hinged and includes lever action handle, light, hinges, cam-locks, door closure, lighted switch and vapor-proof light fixture